Emergency-Stop Push Button; Main Switch - Optimum OPTIdrill B 40GSP Betriebsanleitung

WARNING!
If you bypass, remove or override a safety device in any other way, you are endangering
yourself and other persons working on the geared drill. The possible consequences are

injuries due to components or parts of components flying off at high speed,

contact with rotating parts,

fatal electrocution.
WARNING!
The separating protective equipment which is made available and delivered together
with the machine is designed to reduce the risk of workpieces or fractions of them which
being expelled, but not to remove them completely. Always work carefully and observe
the limit values of your chipping process.
The geared drill includes the following safety devices:

an EMERGENCY STOP push button,

a lockable main switch,

a drilling table with T-slots to fix the workpiece or a vice,

a drill chuck guard, in order to prevent interference with the rotating tool.
1.9.1

EMERGENCY-STOP push button

CAUTION!
Also after actuating the EMERGENCY-
STOP switch, the drilling spindle is
turning - depending on the previously
selected speed - for a few seconds
more.
1.9.2

Main switch

The lockable main switch can be secured
in position "0" by a padlock to prevent
unauthorized or accidental activation.
When the main switch is off, the power
supply to the machine is completely inter-
rupted.
Except for the areas marked by the pictogram in the margin. In these areas there might be volt-
age, even if the main switch is switched-off.
Safety
Version 2.1.2 - 2021-09-22
EMERGENCY-
STOP button
Img.1-2:
Main switch
Img.1-3:
Translation of original instruction
EMERGENCY-STOP button
Main switch
B40 GSP EN
63