Assembly - Heidolph Hei-VOLUME Distimatic Pro Betriebsanleitung

Assembly

Assembly
Assembly
If required, Heidolph offers a professional assembly service for the mechanical setup
and installation of the device, including all accessories supplied and commissioning .
The majority of the sensors and valves of the automatic module are
plugged into the coded connectors on the back of the Distimatic Pro
(sensor cards).
Thanks to the coding of the connectors, all units are automatically
detected and assigned in the device software!
All other units must be plugged into the correspondingly marked
connection sockets. For a detailed description of all connections,
please refer to the assembly instructions supplied.
Faulty or disconnected units are detected and displayed when
performing a system test (integrated software function).
The assembly instructions supplied describe all steps for the correct connection of all
tubes and cables between the Distimatic Pro, the components supplied (containers,
sensors, valves, glassware) and the evaporation system in detail!
CAUTION: Material damage, loss of production
Due to improper system tubing and wiring as well as unauthorized
changes to the system, there is a risk of direct and indirect damage
to property!
➜
➜
➜
The professional mounting and installation of the device including
the supplied accessories is within the sole responsibility of the
operator!
Noncompliance will invalidate any warranty against
Heidolph Instruments.
The operator is solely liable for all damage resulting from unau-
thorized changes or modifications to the device, from the use of
unauthorized or non-genuine spare parts and accessories, or from
disregarding the safety instructions and hazard warnings or the
manufacturer's instructions!
For system tubing and wiring, follow all notes and instruc-
tions in the assembly instructions provided (part number
01-001-009-12-0).
Do not make any unauthorized changes to the device, system,
tubing, nor the existing cable connections.
If necessary, contact our technical service (see "Heidolph
International contact information" on page 156).
91