General Information; Notes On The Product; Directives Applied, Product Certification; California Residents - Heidolph Hei-VOLUME Distimatic Pro Betriebsanleitung

General information

General information

Notes on the product

Directives applied, product certification

CE marking
The device meets all requirements of the following directives:
•
•
NRTL certification
The device has been tested in accordance with the following
standards:
•
•
•
•

California Residents

Important information for California residents regarding Prop 65. Please visit www.
P65Warnings.ca.gov for more information.

Residual risk

The device has been designed and manufactured in accordance with the state-of-the-art
standards at the time of development and the recognized safety regulations. During
mounting and use, as well as during maintenance, repair and cleaning work, there are
nevertheless certain residual risks associated with the described device.
These are identified and described at the appropriate points in this document.

Intended use

The automatic Hei-VOLUME Distimatic Pro module has been specially developed for
the automatic filling and draining of Heidolph rotary evaporators. It is partly completed
machinery as defined by the Machinery Directive 2006/42/EC.
The following processes can be controlled with the automatic module:
– Dosed addition of a starting material
– Drainage of distillate
– Drainage of residue (optional)

Reasonably foreseeable misuse

Additional measures may be necessary, and/or specific directives and safety regulations
may have to be observed for use under conditions or for purposes deviating from the
intended use (see, for example, section "Special hygiene measures for the use of labo-
ratory equipment in food, cosmetics and pharmaceutical production" on page 89).
Corresponding requirements must be evaluated and implemented by the operator in
each individual case.
Low voltage Directive 2014/35/EU
EMC Directive 2014/30/EU
UL 61010-1:2012/R:2018-11
CAN/CSA-C22.2 No. 61010-1:2012/A1:2018-11
UL 61010-2-010:2019
CSA-C22.2 No. 61010-2-010:2019
Supplemented by UL 61010-2-081:2019
Supplemented by CSA-C22.2 No. 61010-2-081:2019
85