Commissioning
Connectivity
All necessary network parameters and basic settings for time synchronization can be
Hei-CONTROL Pro
defined in the
➜
The connection status of the Hei-CONTROL Pro application is displayed in the
[Status] field.
The full functionality of the Hei-CONTROL Pro application also
requires the Hei-CONTROL Pro server. For more information, refer
to the Hei-CONTROL Pro User Manual.
➜
All associated parameters can be defined manually in [static IP configuration] mode
(checkbox deselected, figure on the left). Select the checkbox (figure on the right)
to obtain the IP address of the device automatically.
➜
Select the [NTP server] checkbox to synchronize the system time of the device with
a time server. This function requires a valid IP configuration!
–
Place the cursor in the corresponding input field and use the on-screen
keyboard to enter the required server address.
If the time is synchronized via a time server, the
Timer
select a time zone.
If an ethernet connection exists, the system time is updated auto-
matically via the defined time server. To define the system time
manually, the [NTP server] option must be deselected!
menu:
function button in the display header can only be used to
120
System time/