Operation
The following parameters can be adjusted:
Parameters
Pre-evacuation
Fill
Evaporate
Drain residue
Drain distillate
End of process
Function
Adjustable time for the pre-evacuation phase
Before starting the process loops evaporation – filling –
draining, the system is pre-evacuated for the time set here.
Filling time setting
Adjust the filling time as required using the plus/minus
buttons.
Evaporation time setting
Adjust the evaporation time as required using the plus/
minus buttons.
Residue draining time
▪ Selection switch in position
time.
▪ Selection switch in
container draining time in the selection field (adjustment
via plus/minus buttons or tap/on-screen keyboard).
on
off
Touch the
/
icon to switch between the two options.
Distillate draining time
▪ In the selection field, define a distillate draining time
(adjustment via plus/minus buttons or tap/on-screen
keyboard).
Specify here whether the distillate and/or residue are
drained at the end of the process. Touch the corresponding
checkbox to activate (checkmark) or deactivate the
selection.
144
off
no defined draining
on
position define a residue