Heidolph Hei-VOLUME Distimatic Pro Betriebsanleitung Seite 119

Commissioning
In the event of a power interruption or when the device is switched
off during the current data recording, the recording process is
aborted and the corresponding entry marked with "(!)". The
displayed data set contains the recorded process data that was
recorded up to the power interruption:
In the data log export file, the corresponding file names are also
given the addition "(!)" before the file extension:
"(!).csv", or "(!).json".
Deleting entries
To delete an entry from the list, touch the associated Delete button.
Saving entries on a USB stick
Recorded entries can be saved on an USB-stick. To do this, connect a VFAT-formatted
USB stick to the USB port of the display and open the data list as described.
As soon as a USB stick is connected, a
each list entry.
Touch the associated
PRACTICAL TIP
Large amounts of data are generated during the long-term
recording of process data (several days).
It is therefore recommended to save the current data recording
memory on a USB stick and to remove the existing entries from the
internal memory before starting the process.
Save
Save
button to save an entry to the attached USB stick.
button (diskette symbol) is assigned to
119