Heating Tape (Optional) - Heidolph Hei-VOLUME Distimatic Pro Betriebsanleitung

Device description

Heating tape (optional)

If necessary, the automatic Hei-VOLUME Distimatic Pro module can be operated with
a heating tape (not included in the standard scope of delivery, see section "Scope of
delivery" on page 153, Heat control expansion card).
Principle of operation
The heating tape is wound around the tubing and preheats it during operation so that
viscous media are passed reliably out of the system.
The heating tape is connected to the Distimatic Pro and is integrated in the system
software via the corresponding heat control expansion card.
➜ As soon as the heating tape has been detected correctly, a corresponding icon
appears on the software interface. Touch the associated icon to switch on/off the
heating tape:
The operating behavior is defined by the process parameters of the selected mode
(automatic switching on, on-period/pause time in percent).
PRACTICAL EXAMPLE
Period 100 %, defined heating tape on-period 30 %, pause time
70 %, for a 100-second cycle, equates to an on-period of 30
seconds per cycle.
96