Testing Valves And Signaling - Heidolph Hei-VOLUME Distimatic Pro Betriebsanleitung

Commissioning

Testing valves and signaling

Test all actuators
The
connected valves and signal lights.
System check
➜
Open the
Test all valves and signal lights
➜ In the footer of the
function button to activate the test function (the button icon changes from gray to
orange).
➜ Start the test with
– During the test, all valves and the signal lights are switched twice in succession
(note the color change of the corresponding symbol!). At the end of the test, all
switching elements are back in their initial state.
➜
The test can be stopped at any time by
function can be used to test the function of all
menu:
System check
overview, touch the
Start test
:
Test all actuators
Stop test
.
122