Assembly; Electrical Connections - Heidolph Unimax 1010 Bedienungsanleitung

Assembly

Electrical connections


▪ Repairs of any kind are allowed by qualified professional electricians only.
Any improper repair can result in a dangerous situation. Contact your local Heidolph
Instruments distributor for any repair you may have.
Warning:
Electric shock!
This unit must only be connected to a grounded electrical socket.
The unit and voltage must match. The type label on the back side of
the unit provides all voltage specifics.
The device is supplied with a grounded power cord. In case the
original plug is changed, the new plug must have a protective
conductor!
Unit socket
Rating plate
Fuse
Color code for electrical connections:
Europe
GREEN/YEL-
PE: Protective
LOW
conductor (Earth)
BLUE N: Neutral conductor
BROWN P: Phase
The unit is connected with the power cord supplied to the electrical socket. It plugs into
the housing on the rear side of the unit.
For countries utilizing a plug other than the standard one supplied:
▪
The plug supplied may only be changed by a professional electrician.
▪ If utilizing an adaptor ensure that it is grounded and approved by the local
regulations.
Assembly
North America
GREEN
WHITE
BLACK
19
PE: Protective
conductor (Earth)
N: Neutral conductor
P: Phase