Heidolph Hei-VOLUME Distimatic Pro Betriebsanleitung Seite 151

Troubleshooting
... has been plugged in
twice.
Set switchpoint failed!
Calibration failed!
Update failed!
All error messages and warning messages are shown in plain text
on the display.
Follow the instructions on the display.
In case of recurring errors, please contact the responsible sales
department or our technical service. Contact address see "Heidolph
International contact information" on page 156.
Identical sensors or actuators plugged in,
remove one unit.
Switching error, contact technical service!
Repeat calibration procedure.
Check USB stick for correct connection,
restart update.
151