Opening System Information; Updating The Firmware And Software - Heidolph Hei-VOLUME Distimatic Pro Betriebsanleitung

Operation

Opening system information

Information
The
module.
➜
To view system information, open the
button in the footer.
Versions
➜ Use the
about the software and firmware for your product.
➜ Scan the stored QR code with a suitable device to access additional product infor-
mation and relevant documents via our homepage.
➜
Close the view with

Updating the firmware and software

The system is updated using an update file stored on a USB stick. The upgrade includes
the system's software and firmware by default.
➜ Open the safety cover of the USB port on the control panel and insert the USB stick
with the update file.
Main menu
➜
Open the
System update
➜
Tap the
appears only if a USB stick with a valid update file is detected on the USB port!):
➜ Confirm the confirmation prompt with
➜ Follow the instructions on the display
discard
➜
Touch the
menu without making any changes.
➜ Restart the device after the software update.
➜
After the restart, the firmware of the device can be updated. To do this, also
confirm the corresponding confirmation prompt with
➜ After the update, unplug the USB stick and put the security cover back into the USB
port.
view displays all version and license information for your automatic
Licenses
and buttons to access the desired information
ok
. The display returns to the
:
button at the bottom of the main menu (this button
button to discard the operation and to return to the previous
Main menu
and touch the
Main menu
ok
to update the device software.
ok
,
149
Info
function
.