General Information; Safety Information - Heidolph RZR 1 Betriebsanleitung

E

GENERAL INFORMATION

Unpack your item carefully.
Inspect for damage and report such damage or missing parts to your supplier right
away.
Read your Instruction Manual carefully. Take time to save time when working with
your product. Make sure that every user has read and understood the Instruction
Manual.
Please store the Instruction Manual in a place easily accessible to every user.
IF ALL ELSE FAILS, READ THESE INSTRUCTIONS !
A so-called EURO-plug (DIN 49441 CEE 7/VII 10/ 16 A 250 V) is standard on all of
the products.
For the Continental US they feature a US-standard plug (NEMA Pub.No.WDI.1961
ASA C 73.1 . 1961 page 8 15A 125V).
For using the item in a country with deviating outlet / plug systems, we recommend
to use approved adapters or to have an electrician replace the standard plug with
one suiting your needs.
As shipped, the item features a protective ground wire. When replacing the original
plug, make sure to reconnect this protective ground wire in the new plug !

SAFETY INFORMATION

Please comply with all safety and accident-prevention regulations as in force for
laboratory work!
Use extra care when working with flammable substances; refer to safety data
sheets.
Use extra care when working in the vicinity of flammable and explosive substances.
Motors are of non-sparking type, the item itself however is not explosion-proof.
When connecting your item with your local power supply, please make sure your
item is designed for your local voltage; go by the data plate on the item.
Please connect your item with a protective-ground outlet only.
Turn your power switch OFF whenever the item is not used, or before disconnecting
the plug.
Repair work is limited to technicians approved by Heidolph Instruments.
Your item needs a solid stand.
15