Operation And Controls; Emergency Stop - Heidolph Reax 20 Betriebsanleitung

E
Before connecting power cord with mains outlet, make sure that:
your item is designed for your local voltage and frequency (data plate on
-
item).
master switch is set to "0" and all controls are in "min." position (turn CCW
-
completely);
Carefully close your vessels and select appropriate shaking intensity (if vessel
remain open) to avoid splashes and spillage.
We recommend starting with low shaking speed and gradually increasing
frequency to avoid accidental shaking at high speed.
When handling hazardous fluids, make reference to applicable safety
information.
Make sure the bottles are inserted properly.
Switch on the instrument with switch (A) and the green pilot
lamp in switch (A) lights. Set the required speed with speed
control knob (B). The set speed is indicated on the scale.
REAX 20 is equipped with an emergency stop.
In case of hazard from rotating parts press emergency stop!.
To reactivate, turn Emergency Stop button clockwise, and again press power
switch (A). Make sure hazard is cleared.

OPERATION AND CONTROLS

EMERGENCY STOP

A
18