Replacing The Headlight Bulbs - Yamaha WR250F 2001 Fahrer- Und Wartungshandbuch

REPLACING THE HEADLIGHT BULBS

3 - 49
REPLACING THE HEADLIGHT BULBS
1. Remove:
Headlight
Refer to "SEAT, FUEL TANK AND
SIDE COVERS" section in the CHAP-
TER 4.
2. Remove:
Headlight bulb holder cover 1
3. Detach:
Headlight bulb holder 1
4. Remove:
Headlight bulb 2
WARNING
Since the headlight bulb gets extremely
hot, keep flammable products and your
hands away from the bulb unit it has
cooled down.
5. Install:
Headlight bulb
Secure the new headlight bulb with the
headlight bulb holder.
CAUTION:
Avoid touching the glass part of the head-
light bulb to keep it free form oil, otherwise
the transparency of the glass, the life of the
bulb and the luminous flux will be
adversely affected. If the headlight bulb
gets soiled, thoroughly clean it with a cloth
moistened with alcohol or lacquer thinner.
6. Attach:
Headlight bulb holder
7. Install:
Headlight bulb holder cover
8. Install:
Headlight bolt (left and right)
10 Nm (1.0 m · kg, 7.2 ft · lb)
Headlight bolt (lower)
7 Nm (0.7 m · kg, 5.1 ft · lb)
Refer to "SEAT, FUEL TANK AND
SIDE COVERS" section in the CHAP-
TER 4.
INSP
ADJ