Yamaha WR250F 2001 Fahrer- Und Wartungshandbuch Seite 302

1
a
2
NOTE:
Install the carburetor breather hoses to the
carburetor so that the hoses do not bend near
where they are installed.
Carburetor installation
NOTE:
Install the projections a on the carburetor joint
a
between the clamp ends.
1
NOTE:
Install the projection a on the cylinder head
between the carburetor joint slots b.
1
NOTE:
Install the projection between the carburetor
joint slots.
1
4 - 18
CARBURETOR
19. Install:
Carburetor breather hose 1
1. Install:
Clamp 1
2. Install:
Carburetor joint 1
3 Nm (0.3 m · kg, 2.2 ft · lb)
3. Install:
Carburetor 1
4. Tighten:
Screw (air filter joint) 1
3 Nm (0.3 m · kg, 2.2 ft · lb)
Screw (carburetor joint) 2
3 Nm (0.3 m · kg, 2.2 ft · lb)
ENG