Yamaha WR250F 2001 Fahrer- Und Wartungshandbuch Seite 598

REAR SHOCK ABSORBER
2. Install:
NOTE:
Apply the molybdenum disulfide grease on
the bearing.
Apply the lithium soap base grease on the
bushing, collars and dust seals.
Install the dust seals with their lips facing
outward.
3. Install:
4. Install:
NOTE:
Apply the molybdenum disulfide grease on the
bolt.
5. Install:
NOTE:
Apply the molybdenum disulfide grease on
the bolt.
Insert the bolt from right side.
6. Install:
7. Tighten:
1
5 - 66
CHAS
Bushing 1
Collar 2
Dust seal 3
Rear shock absorber
Bolt (rear shock absorber-frame) 1
Nut (rear shock absorber-frame) 2
56 Nm (5.6 m · kg, 40 ft · lb)
Washer 1
Bolt (rear shock absorber-relay arm) 2
53 Nm (5.3 m · kg, 38 ft · lb)
Rear frame 1
Bolt (rear frame) 2
29 Nm (2.9 m · kg, 21 ft · lb)
Bolt (reservoir tank) 3
10 Nm (1.0 m · kg, 7.2 ft · lb)
Screw (air filter joint) 1
3 Nm (0.3 m · kg, 2.2 ft · lb)