Inhaltsverzeichnis
Werbung
REAR SHOCK ABSORBER REBOUND
DAMPING FORCE ADJUSTMENT
3 - 40
EC36N014
REAR SHOCK ABSORBER REBOUND
DAMPING FORCE ADJUSTMENT
1. Adjust:
Rebound damping force
By turning the adjuster 1.
Stiffer a → Increase the rebound damp-
ing force. (Turn the adjuster 1 in.)
Softer b → Decrease the rebound damp-
ing force. (Turn the adjuster 1 out.)
Extent of adjustment
Maximum
Fully turned in
position
STANDARD POSITION:
This is the position which is back by the spe-
cific number of clicks from the fully turned-in
position. (Which align the punch mark a on
the adjuster with the punch mark b on the
bracket.)
Standard position:
About 7 clicks out
,
*
**About 10 clicks out
* For EUROPE
** For AUS, NZ and ZA
CAUTION:
Do not force the adjuster past the minimum
or maximum extent of adjustment. The
adjuster may be damaged.
INSP
ADJ
Minimum
20 clicks out
(from maximum
position)
Werbung
Inhaltsverzeichnis
