Entering Installation Pin In Transmitters; Delete Installation From Memory Cartridge; Delete Memory Cartridge - Jcm-Tech Manager+Dcs Bedienungsanleitung

MANAGER+DCS 3.0X I
If the TM entered is old, the following message will appear:
By pressing the key
Enter the PIN and press
By pressing you will return to the previous screen, be-
cause in old format it was not possible to enter the PIN.
If the TM entered is new, the following message will ap-
pear:
Enter the PIN and press

5.21.2 Entering installation PIN in transmitters

Access is made by means of Transmitter Menu/Add PIN.
By pressing the
Enter the PIN and press
Press any button of the Transmitter and a screen will ap-
pear to confirm the operation.

5.22 Delete installation from memory cartridge

This function is accessed via Main Menu/Cartridge.
It enables a determined installation to be deleted from the cartridge.
Select Cartridge and press
Select Delete Instal. and press
Select the number of the sector where the installation to be deleted is stored. Press
Select the number corresponding to the installation to be
deleted. Press
Confirm the action by pressing

5.23 Delete memory cartridge

the screen will show
again. The screen will show:
again. The screen will show:
key, the screen will show
again. The screen will show:
.
.
.
.
64
.