Save Installation In Memory Cartridge; Restore Installation From Memory Cartridge - Jcm-Tech Manager+Dcs Bedienungsanleitung

5.16 Save installation in memory cartridge

This function makes it possible to dump a Receiver, Mini-A.C. or Maxi-A.C.
installation from the memory of the MANAGER+DCS to the memory car-
tridge.
The capacity of the cartridge is divided into seven sectors, numbered from
zero to six. Only installations of the same type can exist in each sector. The
first installation stored in each sector determines the type of installations,
which will subsequently be stored in it. The maximum number of installa-
tions stored varies according to the type:
32 Receiver installations of 126 codes
8 Receiver installations of 500 codes
16 Mini-A.C. installations
2 Maxi-A.C. installations
The initials
Rc Receiver 126
R5 Receiver 500
Mn Mini-A.C.
Mx Maxi-A.C.
From the Edit menu of a Receiver, Mini-A.C. or Maxi-A.C.
installation, press
Select Save Instal. Press
Select the number of the sector where the installation is to be stored and press
Then select the number of the installation and press

5.17 Restore installation from memory cartridge

This function is accessed via:
Main Menu/Receiver,
Main Menu/Mini A.C. Unit...
...or Main Menu/Maxi A.C. Unit.
It enables a Receiver, Mini A.C. or Maxi A.C. installation to be retrieved from the
cartridge to the memory of the MANAGER+DCS.
Indicate the occupied sectors, and each
occupied installation is indicated by
the symbol #.
.
.
again.
61
General functions
.