Storing "N" Transmitters - Jcm-Tech Manager+Dcs Bedienungsanleitung

Press the and
will appear on the screen requesting the number of trans-
mitters to be read. Enter the quantity by means of the nu-
merical keys. Press
The following message will appear:
Insert the transmitter into the transmitter connection adapter (see figure on page
6, no. 9) and press any button of the transmitter.
The confirmation of the operation will appear on the screen:
If we try to enter a transmitter twice, the following message
will appear:
Once all of the transmitters have been entered, the screen will show the position of
each transmitter, the code, the replacement number, the status and the channel.
Press to return to the menu.
Remember to store the installation again in the memory card and in the
memory cartridge in order to make the changes effective.

2.6 Storing "n" transmitters

Retrieve the installation as indicated in section 2.1 of this chapter.
From the menu:
Press . The installation will appear on the screen:
Quick guide for the maintenance of installations
keys simultaneously. A message
.
15