Read Installation Memory Card; Programming Installation Memory Card - Jcm-Tech Manager+Dcs Bedienungsanleitung

MANAGER+DCS 3.0X I

5.14 Read installation memory card

This function is accessed via:
Main Menu/Receiver,
Main Menu/Mini A.C. Unit...
...or Main Menu/Maxi A.C. Unit.
It enables the contents of the memory card of a Receiver, Mini-A.C. or Maxi-A.C. to
be dumped into the memory of the MANAGER+DCS..
Select Main Menu/Receiver,
Main Menu/Mini-A.C. Unit...
...or Main Menu/Maxi-A.C. Unit.
Press . Select Read Memory Card
Press . In the case of a Mini-A.C. or Maxi-A.C., enter the password of the mem-
ory card and press
In order to work in the installation retrieved, select Edit.
Press .

5.15 Programming installation memory card

Within the Edit menu of a Receiver, Mini-A.C. or Maxi-A.C.
installation, press
Card. Press .
Confirm the action by pressing
grammer will ask for the password of the memory card. Enter it and press
password will appear on the screen. Press
.
o and select Prog. Memory
. In the case of a Mini-A.C. or Maxi-A.C., the Pro-
again to confirm it.
60
, The new