jcm-tech MANAGER+DCS Bedienungsanleitung Seite 166

MANAGER+DCS 3.0X I
Press . The following message will appear:
Enter the chosen password and press
questing confirmation will appear on the screen:
It is possible to change or assign a password at any time while creating an installa-
tion, by means of the following process:
In the Mini Unit Menu/Edit, press
word and press
ing again.
Press to return to the Mini Unit Menu/Edit.
Despite having answered "No" to the question of whether or not you wish to save the
TM, provided you have not turned off the MANAGER+DCS, you will be able to save
the installation in the Mini-A.C. Unit memory card and in the memory cartridge,
otherwise all of the information will be lost when the Portable Programmer is
switched off.
Using the or
Press . The following message will appear:
Press again. A message will appear requesting the
password of the memory card of the Mini-A.C. Unit.
Enter the password by means of the numerical keys and
press . A message will appear indicating the password
number previously selected.
If no password has been entered, three question marks will appear on the screen,
and it will be impossible to store the memory card until a password is entered.
The following message will now appear:
If you do not wish to change the password, press
will process the data.
On the other hand, if you wish to change it, press
following message will appear:
Enter the new password and press
appear asking for confirmation of the password.
Enter the password again and press
will ask if you wish to store the password.
We recommend noting down the password number in a safe place, never
in the Mini-A.C. Unit itself.
. Confirm the password by entering it a second time and press-
keys, locate the menu:
. A message re-
and simultaneously. Enter the new pass-
and the MANAGER+DCS
. The
. A message will
. The programmer
32