jcm-tech MANAGER+DCS Bedienungsanleitung Seite 154

MANAGER+DCS 3.0X I
2.10 Storing "n" smartcards
Retrieve the installation as indicated in section 2.1 of this chapter.
From the menu:
Press . The installation will appear on the screen:
Using the or
proximity keys.
Press the and
will show:
Press and a message will ask how many proximity
keys you wish to store. Enter the quantity using the nu-
merical keys. Press
The following message will appear:
Approach the key to the Proximity Key Interface.
The confirmation of the operation will appear on the screen.
Press for the programme to request the introduction of
another proximity key.
Once all of the keys have been entered, the screen will show the position of each
card, the code, the replacement number, the status and the channel.
Press to return to the menu:
Remember to store the installation again in the memory card and in the
memory cartridge in order to make the changes effective.
keys, enter the position from which you wish to read the
keys simultaneously. The screen
.
20