jcm-tech MANAGER+DCS Bedienungsanleitung Seite 168

MANAGER+DCS 3.0X I
Once selected, press
will appear on the screen:
Press a
gain. The following message will appear:
Press the and
appear on the screen requesting the number of transmitters
to be stored.
Enter the quantity by means of the numerical keys (e.g. 3).
Press . The following message will appear:
Insert the transmitter into the transmitter connection adapter (see figure on page
6, no. 9) and press any button of the transmitter.
The confirmation of the operation will appear on the screen:
If we try to enter the same transmitter twice, the following
message will appear:
Once all of the transmitters have been entered, the screen will show the position of
each transmitter, the code, the replacement number, the status and the channel.
Pressing the and
We recommend making a reservation of codes in the memory card of the
Maxi-A.C., in order to be able to store transmitters or smartcards without
having to go to the place where the receiver element is installed. For more
information, see the chapter on Maintenance of Installations.
If no change has been made, on pressing
turn to the Maxi Unit Menu/Edit.
. The Maxi Unit Menu/Edit menu
. Keys simultaneously. A message will
keys simultaneously alternates the status between G and R.
, you will re-
34