jcm-tech MANAGER+DCS Bedienungsanleitung Seite 165

Press the and
will appear on the screen requesting the number of trans-
mitters to be stored.
Enter the quantity by means of the numeric keys (e.g. 3).
Press . The following message will appear:
Insert the transmitter into the transmitter connection adapter (see figure on page
6, no. 9) and press any button of the transmitter.
The confirmation of the operation will appear on the screen:
If we try to enter the same transmitter twice, the following
message will appear:
Once all of the transmitters have been entered, the screen will show the position of
each transmitter, the code, the replacement number, the status and the channel.
Pressing the and
We recommend making a reservation of codes in the memory card of the
receiver, in order to be able to store transmitters, smartcards or keys with-
out having to go to the place where the receiver element is installed. For
more information, see the chapter on Maintenance of Installations.
If no change has been made, on pressing
turn to the Mini Unit Menu/Edit.
If some change has been made, on pressing the key
programmer will ask you whether you wish to save the TM.
If you answer "Yes", follow the instructions that appear on the screen, which corre-
spond to the following.
If you answer "No", you will return to the Mini Unit Menu/Edit.
keys simultaneously. A message
keys simultaneously alternates the status between G and R.
31
Creating installations
, you will re-
the