jcm-tech MANAGER+DCS Bedienungsanleitung Seite 178

MANAGER+DCS 3.0X I
Press . The following message will appear momentarily:
Followed by:
The Programmer will automatically return to the menu:
Switch off the power supply of the Portable Programmer, remove the memory card
and insert it correctly in the receiver (remembering that this must be switched off).
The installation is complete.
It is very important to note down the installation number and the sector of
the memory cartridge where it has been stored, together with the position
number and the code of each transmitter, in order subsequently to be able
to maintain the installation efficiently.
44