Read Smartcard; Read Proximity Key; Memorize Transmitter; Memorize Smartcard - Jcm-Tech Manager+Dcs Bedienungsanleitung

MANAGER+DCS 3.0X I
5.12.1 Read transmitter
Press and simultaneously. Press any button on the transmitter. The code
of the transmitter will appear on the screen. To exit, press .

5.12.2 Read smartcard

Press and simultaneously. Insert the card. The code of the card will appear
on the screen. To exit, press .

5.12.3 Read proximity key

To read the code of the proximity key, simultaneously press + and follow
the instructions that appear on the screen of the Portable Programmer.

5.12.4 Memorize transmitter

Press and simultaneously. Enter the required code. Press . Press any
button on the transmitter.

5.12.5 Memorize smartcard

Press and simultaneously. Enter the code. Press . Insert the card.

5.12.6 Memorize proximity key

To save the code in the proximity key, simultaneously press + and follow the
instructions that appear on the screen of the Portable Programmer.

5.13 Create a Receiver, Mini-A.C. or Maxi-A.C. installation

This menu is accessed via:
Main Menu/Receiver, Main Menu/Mini A.C. Unit or Main Menu/Maxi A.C. Unit.
It makes it possible to create or modify an installation in the memory of the
MANAGER+DCS. The following data are shown on the screen:
Select Main Menu/Receiver...
Main Menu/Mini A.C. Unit...
...or Main Menu/Maxi A.C. Unit.
Press . Select Edit
56