jcm-tech MANAGER+DCS Bedienungsanleitung Seite 163

The confirmation of the operation will appear on the screen:
If we try to enter the same transmitter twice, the following
message will appear:
Once all of the transmitters have been entered, the screen will show the position of
each transmitter, the code, the replacement number, the status and the channel.
Pressing the and
We recommend making a reservation of codes in the memory card of the
receiver, in order to be able to store transmitters, smartcards or keys with-
out having to go to the place where the receiver element is installed. For
more information, see the chapter on Maintenance of Installations.
If no change has been made, on pressing
turn to the Receiver menu/Edit.
If some change has been made, on pressing the key
programmer will ask you whether you want to save the TM.
If you answer "Yes" follow the instructions that appear on the screen corresponding
to the following.
If you answer "No", you will return to the Receiver Menu/Edit.
Despite having answered "No" to the question of whether or not you wish to save the
TM, provided you have not turned off the MANAGER+DCS, you will be able to save
the installation in the Receiver memory card and in the memory cartridge, otherwise
all of the information will be lost when the Portable Programmer is switched off.
Using the or
Press . The following message will appear:
Press again to confirm. The following message will
appear momentarily:
Followed by:
The programmer will then return to the menu:
keys simultaneously alternates the status between G y R.
keys, locate the menu:
, you will re-
, the
29
Creating installations