Reading "N" Smartcards - Jcm-Tech Manager+Dcs Bedienungsanleitung

MANAGER+DCS 3.0X I
Using the or
transmitters.
Press the and
appear on the screen requesting the number of transmitters
to be stored. Enter the quantity by means of the numerical
keys. Press .
The following message will appear:
Insert the transmitter into the transmitter connection adapter (see figure on page
6, no. 9) and press any button of the transmitter.
The confirmation of the operation will appear on the screen:
Once all of the transmitters have been entered, the screen will show the position of
each transmitter, the code, the replacement number, the status and the channel.
Press to return to the menu:
Remember to store the installation again in the memory card and in the
memory cartridge in order to make the changes effective.

2.7 Reading "n" smartcards

Retrieve the installation as indicated in section 2.1 of this chapter.
From the menu:
keys, enter the position from which you wish to store the
keys simultaneously. A message will
16