jcm-tech MANAGER+DCS Bedienungsanleitung Seite 169

If some change had been made, on pressing the key
programmer will ask whether you wish to save the TM.
If you answer "Yes", follow the instructions that appear on the screen, which corre-
spond to the following.
If you answer "No", you will return to the Maxi Unit Menu/Edit.
Press . The following message will appear:
Enter the chosen password and press
questing confirmation will appear on the screen.
It is possible to change or assign a password at any time while creating an installation,
by means of the following process:
Press and
the password by entering it a second time and pressing
Press to return to the Maxi Unit Menu/Edit.
Despite having answered "No" to the question of whether or not you wish to save the
TM, provided you have not turned off the MANAGER+DCS, you will be able to save
the installation in the Maxi-A.C. memory card and in the memory cartridge, other-
wise all of the information will be lost when the Portable Programmer is switched
off.
Using the or
Press . The following message will appear:
Press again. A message will appear requesting the
password of the memory card of the Maxi-A.C.
Enter the password by means of the numerical keys and
press . A message will appear indicating the password
number previously selected.
If no password has been entered, four question marks will appear on the screen,
and it will be impossible to store the memory card until a password is entered.
The following message will now appear:
If you do not wish to change the password, press
will process the data.
On the other hand, if you wish to change it, press
following message will appear:
Enter the new password and press
appear asking for confirmation of the password.
simultaneously. Enter the new password and press
keys, locate the menu:
the
. A message re-
and the MANAGER+DCS
. The
. A message will
35
Creating installations
. Confirm
again.