SICK TDR Betriebsanleitung Seite 77

LFP Cubic
Notes
Measurement deviation can be higher
■
Signal quality 1 and 2 are not counted
■
The sensor automatically quits expert mode after 5 minutes of inactivity on the display.
■
Configuration (foam teach) does not take place in the following processes:
■
Changing the probe length
○
Changing the measuring mode
○
Changing the teach-in depth
○
Running AutCal
○
If you are encountering problems, see Chapter 7 "Troubleshooting".
8014825/YE12/2014-09-15 © SICK AG • Level sensors • Germany • Subject to change without notice
2 Commissioning the LFP
EN
Operating instructions
77