CLIVET ELFORoom2 003.0 Anleitung Zur Installation Und Wartung Seite 69

HID-E3 thermostat - 4 pipe system
Water probe
Not connected
Ycool Water solenoid valve(cooling)
LED meaning / alarms
The LED (A) is off if input EV (thermostat control) is not closed (stand-by condition).
It is switched on upon closure of contact EV (thermostat control) and signals standard operation.
ALARMS
It flashes frequently if the S1 grille safety micro-switch is activated due to filter cleaning operations.
It emits a single flash + pause for fan stop alarm due to unsuitable water (with H2 water probe connected).
2 flashes + pause for motor alarm (for example, jamming due to foreign bodies, fault in the rotation sensor).
3 flashes + pause for water probe alarm disconnected or faulty.
69
5 - ELECTRICAL CONNECTIONS
M1 = motor
Yheat Water solenoid valve(heating)
water thermo-
stat probe
4 pipes