Werbung
The manual mode can be used for shooting at a desired
shutter speed, lncluding Bulb and X synch tlash shots with
f lash units other than TLA f/ash system. For manual
exposure, turn the shutter control dial lrom the "A" setting
to the desired manual shutter speed number. ln the
manual exposure mode, the selected shutter speed will be
indicated by a flashing LED display inside the viewtinder.
tr
While pressing the shutter dial lock-release button, turn the
dial to the desired manual shutter speed setting. After releasing
the "A" or "X" setting on the shutter control dial, there is no
need to use the lock-release button for further resettino of the
d i a l .
A
Press the exposure check button. The LED display will flash
to indicate the selected shutter speed, while a second LED
display will steadily light, just as in the case of the AUTO mode,
to indicate the correct shutter speed for the aperture setting in
effect. For correct exposure, turn the aperture ring until the
steadily lit shutter speed reading merges with the other reading
that is flashing.
@
B2
Werbung
