Herunterladen Diese Seite drucken

Contax RTS II Gebrauchsanweisung Seite 13

Werbung

Always use a standard 35 mm film cassette (12, 20, 24 or 36
exposure load). Avoid direct sunlight when loading tilm.
O
Turn the main switch ON. Lift the fitm rewind knob and ouil it
up firmly until the camera back clicks open.
A
Insert the cassette into the film chamber, then
push the rewind knob down to its normal position,
twisting back and forth slightly until it seats into place.
Then reposition the rewind crank handle so that it rests in its
receptacle above the "A" (AUTO) setting on the shutter control
d i a l .
g
Draw the film leader out of the cassette and insert the free
end into any clip on the take-up spool.
The film may be inserted into any one of the clips, however you
should avoid inserting the film end too deeply or too shallowly.

Werbung

loading

Verwandte Produkte für Contax RTS II