Setting The Language, Date And Time; Installing A Master Docking Station - Viking MI 632 M Gebrauchsanleitung

9.9 Setting the language, date and time

● Pressing any button on the control
panel activates the machine and thus
the installation assistant.
Select the required display language
and confirm with the OK button.
Confirm your language selection
with the OK button or select
"Change" and repeat the language
selection.
● If necessary, enter the 9-digit serial
number of the robotic mower. This
number is printed on the identification
plate (sticker in compartment under
control panel).
114
Set the current date using the
control pad and confirm with the OK
button.
Set the current time using the
control pad and confirm with the OK
button.
In the iMow app, check whether all
machines are assigned to an iMow TeaM
or whether more are to be added.
If the machines in the iMow app
have not yet been assigned to an
iMow TeaM, the assignment must
be carried out now.
Once all machines are assigned to
the iMow TeaM, confirm with the OK
button.
The installation assistant can only
continue on the machine on which the
message is confirmed.
All other machines assigned to the same
iMow TeaM will be disabled. These
machines are in synchronisation mode.
The following symbol appears on the
display.
After the complete installation and
synchronisation of all data, the
machines will be automatically
unlocked again.
The status screen appears on the
display. ( 11.2)

9.10 Installing a master docking station

Master docking station:
If an iMow TeaM with multiple machines
and docking stations is installed, the
perimeter wire is connected to just one
docking station that generates the signal
for the perimeter wire. This is the master
0478 131 9937 B - EN