Team Settings - Viking MI 632 M Gebrauchsanleitung

battery symbol in the menus. If automatic
mode is switched on, the robotic mower
will work in collaboration with the other
machines in the mowing area.
If the robotic mower is inactive, the text
"iMow is inactive" appears on the status
screen and the Active symbol is not
displayed next to the battery symbol in the
menus. If automatic mode is switched on,
the iMow TeaM will work without the
inactive robotic mowers. Mowing
operations can be initiated via the
commands "Start mowing" or "Start time-
delayed mowing".
The "iMow active/inactive"
command can only be executed on
the machine.
4. Manual mowing:
Manual lawn mowing.
For safety reasons, the mowing
blade can only be activated if the
OK button is pressed and held and the
Mow button is then pressed. Steering is
performed using the control pad. (
5. Start mowing:
The robotic mower starts the
mowing operation automatically
following activation. The end of
the mowing operation must be specified.
If a secondary area was installed, after
pressing the OK button it is necessary to
define whether mowing is taking place on
a secondary area or on the main area.
( 15.5)
130
In the main menu (
the command "Start mowing"
can also be activated by
pressing the Mow button.
If an external docking zone with a
corridor was installed, bring the
robotic mower to the mowing area
before activation of the command
"Start mowing".
"Start mowing" can also be
activated in the app. (
6. Edge mowing:
Following activation, the robotic
mower mows the edge of the
mowing area. After completing
one circuit, it travels back to a docking
station and charges the battery.
11.6 iMow TeaM
15.6)
Select the required command using the
control pad and execute by pressing OK.

1. TeaM settings (

2. TeaM installation (
3. TeaM safety (
If settings are changed on a
machine, synchronisation takes
place with all the other robotic
mowers that form an iMow TeaM.
( 10.)
11.1),
10.)
11.7)
11.8)
11.9)
11.7 TeaM settings
1 Rain sensor
2 Time
3 Date
4 Track offset
5 Language
1 Rain sensor:
The rain sensor can be set so that
mowing is interrupted or does not
start when it is raining.
In order to set the 5-stage
sensor, press the control pad to
the left or right. The current
value is displayed in the "Settings" menu
by means of a line diagram.
Moving the control influences
– the sensitivity of the rain sensor,
– the time the robotic mower waits for the
sensor surface to dry following rain.
In the case of medium
sensitivity, the robotic
mower is ready for operation
under normal ambient
conditions.
Move the bar further to the
left for mowing at a higher
humidity. If the bar is moved
all the way to the left, the
robotic mower will mow even
in wet external conditions and will not
interrupt the mowing operation if rain drops
land on the sensor.
0478 131 9937 B - EN