Viking MI 632 M Gebrauchsanleitung Seite 174

Divided mowing area – the robotic mower
cannot travel independently from one
mowing area to the other.
Docking zone:
Location (1) directly next to the houses A
No-go areas:
Installation of the perimeter wire (2)
around the free-standing tree and around
the vegetable patch B based on a linking
section installed at right angles to the
edge.
Wire clearances:
Clearance to obstacles that can be
travelled on such as patios and paths:
0 cm
Clearance to high obstacles: 27 cm
172
Clearance to the tree: 37 cm
Minimum wire clearance in the confined
areas behind the vegetable patch: 54 cm
Secondary area:
Installation of a secondary area C; linking
section (3) on the patio accommodated in
a cable duct.
Programming:
Define the size of the mowing area
(without secondary area), program one
starting point (4) in the confined area –
starting frequency 2 of 10 operations
( 10.)
Particularities:
Bring the robotic mower to the secondary
area several times per week and activate
the command "Start mowing". (
Take the mowing performance into
account. ( 14.4)
If necessary, install two separate mowing
areas.
11.5)
0478 131 9937 B - EN