Adjusting The Cutting Height; Setting The Language, Date And - Viking iMow MI 632 Gebrauchsanleitung

Fit the cover (J) and tighten the
screws (K). Observe a maximum
tightening torque of 1 - 2 Nm.
● Set the robotic mower on its wheels.

9.3 Adjusting the cutting height

Lowest cutting height:
Level 1 (20 mm)
Highest cutting height:
Level 8 (60 mm)
0478 131 9931 B - EN
Press and turn the rotary knob (1). It
engages again when released. The
marking (2) indicates the set cutting
height.
The rotary knob can be removed
upwards from the adjustment
element. This design is
implemented for safety reasons: it
ensures that the machine cannot be
lifted and carried by the rotary knob.
9.4 Setting the language, date and time
● Pressing any button on the control
panel activates the machine and thus
the installation assistant.
Select the required display language
and confirm with the OK button.
Confirm your language selection
with the OK button or select
"Change" and repeat the language
selection.
● If necessary, enter the 9-digit serial
number of the robotic mower. This
number is printed on the identification
plate (sticker in compartment under
control panel).
Set the current date using the
control pad and confirm with the OK
button.
105