Viking MI 632 M Gebrauchsanleitung Seite 135

– High:
As "Medium", but settings can also only
be changed following entry of the PIN
code.
Recommendation:
Set the "High" safety level.
● Select the required level and confirm
with OK; enter the 4-digit PIN code if
necessary.
Anti-th. alarm:
If the mower is lifted or tilted by the handle
for longer than 10 seconds, the PIN query
appears. If the PIN code is not entered
within one minute, an alarm sounds and
automatic operation is switched off.
Connection lock:
PIN code query prior to linking of the
robotic mower and docking station.
Reset lock:
PIN code query prior to resetting the
machine to the factory defaults.
Time lock:
PIN code query for changing a setting if no
PIN code has been entered for more than
one month.
Setting prot.:
PIN code query when settings are
changed.
2 Link iMow and dock:
Following initial installation, the
robotic mower can only be operated
in conjunction with the installed master
docking station.
Following the replacement of the master
docking station, a robotic mower and the
master docking station must be linked
again.
None of the other machines that are
grouped together to form an iMow TeaM
need to be linked to the new master
docking station. These machines will
receive the new signal by automatic data
synchronisation
0478 131 9937 B - EN
● Install the master docking station and
connect the perimeter wire. (
( 9.12)
Lift a robotic mower slightly by the carrying
handle (1) and relieve the weight on the
drive wheels. Push the machine, resting
on its front wheels, into the master docking
station.
● After pressing the OK button,
enter the PIN code. The robotic
mower will then search for the
wire signal, save it and automatically
send it to the other machines grouped
together to form an iMow TeaM. This
process takes several minutes.
( 9.14)
No PIN code is required in the
safety level "None".
3 Change PIN code:
The 4-digit PIN code can be
changed if required.
The "Change PIN code" menu item
9.10),
is only displayed in the safety levels
"Low", "Medium" or "High".
If the PIN code is changed on a
machine, this is set on all grouped
TeaM machines through automatic
synchronisation. All grouped TeaM
machines always have the same
PIN code.
● First enter the old PIN code on a
machine and confirm with OK.
● Then enter the new 4-digit PIN code
and confirm with OK.
Recommendation:
Write down the new PIN code.
If the PIN code is entered
incorrectly 5 times, a 4-digit master
code is required, otherwise
automatic operation is switched off.
For the creation of a master code,
you must provide your specialist
dealer with the 9-digit serial number
and the 4-digit date, which are
displayed in the selection window.
4 Child lock:
For switching on and off the device that
prevents the mowing blade from running
when the machine is being played with.
Function:
If the impact sensor is triggered several
times in succession within a short time (for
example when a child is playing with the
robotic mower), the mowing blade is
switched off and the robotic mower stops
with an appropriate message.
If the impact sensor is not triggered again,
the robotic mower continues automatic
mowing after a few seconds.
5 GPS protect.
For switching position monitoring on
and off. ( 5.10)
133