Imow; Settings; Safety - Viking MI 632 M Gebrauchsanleitung

– GPRS:
Signal strength of the mobile radio
connection; the more plus characters
shown (max. "++++"), the better the
connection
– Network:
Network ID, comprising country code
(MCC) and provider code (MNC)
– Mobile phone number:
Mobile phone number of the owner; is
entered in the app ( 10.)
– IMEI:
Hardware number of the radio module
– IMSI:
International mobile subscriber identity
– SW:
Software version of the radio module
– Ser.-No.:
Serial number of the radio module

11.11 iMow

Select the required submenu using the
control pad and execute by pressing OK.

1. Settings

2. Safety

3. Service
4. Dealer area
0478 131 9937 B - EN
All settings in the "iMow" menu are
only applicable for the individual
machine. The settings are not
synchronised to other machines.
11.12 Settings
1 Status screen
2 Date format
3 Contrast
1 Status screen:
Select the information that is to
appear in the status screen.
Setting the status screen:
In order to configure the status screen,
select the left or right screen with the
control pad and confirm with OK.
Charge state:
Shows the battery symbol with the
charge state in percent
Rem. time:
The remaining mowing duration
during the current week in hours and
minutes
Time and date:
Current date and current time
Start time:
Start of the next planned mowing
operation. During a running active
time, the text "active" is displayed.
Mowing ops:
Total number of mowing operations
performed
Mowing hours:
Total duration of all mowing
operations performed
Distance:
Total distance covered
GPRS reception:
Signal strength of the mobile radio
connection with network ID. A small
x or question mark indicates that the
robotic mower is not connected to
the Internet.
GPS reception:
GPS coordinates of the robotic
mower. ( 11.10)
2 Date format:
Set the required date format.
3 Contrast:
The display contrast can be
adjusted as required.
11.13 Safety
1 Disab. device
2 Start signal
3 Alarm signal on/off
4 Menu signal on/off
5 Keylock
1 Disab. device:
The disabling device is activated
with OK; the robotic mower can no
longer be operated.
The robotic mower must be disabled prior
to any maintenance or cleaning work, prior
to transportation and prior to inspection.
( 5.2)
● To deactivate the disabling
device, press the illustrated
button combination (Mow button
and OK button).
135