Commands; Imow Team - Viking MI 632 M Gebrauchsanleitung

2. Active status
3. Time
4. Mobile radio signal
1. Charge state:
The battery symbol serves to
indicate the charge state.
No bars – battery discharged
1 to 5 bars – battery partially
discharged
6 bars – battery fully charged
During charging, the mains plug
symbol is shown instead of the
battery symbol.
2. Active status:
If the robotic mower is activated to
work in the iMow TeaM, the Active
symbol is displayed. If the robotic mower
is inactive, the Active symbol is not
displayed.
3. Time:
The current time is indicated in 24 hour
format.
4. Mobile radio signal:
The signal strength of the
mobile radio connection
(GPRS) is indicated using 4
bars. The more bars visible,
the better the reception.
A reception symbol with a
small x indicates that there is
no connection with the
Internet.
A question mark is shown
during initialisation of the radio module
(checking hardware and software – e.g.
after switching on the robotic mower).
0478 131 9937 B - EN
11.4 Main menu
The main menu is displayed,
– when the status screen (
is left by pressing the OK button,
– when the "Main menu" command is
activated,
– when the Back button is pressed in the
second menu level.

1. Commands (

11.5)
Selected commands are only
executed on the machine on
which the command is activated. There is
no synchronisation.

2. iMow TeaM (

11.6)
All settings made in this menu are
applied through synchronisation
to all machines assigned to the
iMow-TeaM.
3. Information ( 11.10)
A variety of information
concerning the respective
machine and the iMow TeaM is displayed
in this menu.
4. iMow ( 11.11)
All settings made in this menu apply solely
to the respective machine. There is no
synchronisation.
11.5 Commands
11.2)
Select the required command using the
control pad and execute by pressing OK.
1. Main menu
2. Lock iMow
3. iMow active/inactive
4. Manual mowing
5. Start mowing
6. Edge mowing
1. Main menu:
OK takes you back to the main
menu.
2. Lock iMow:
Activates the disabling
device.
Press the illustrated button
combination to unlock. (
3. iMow active/inactive:
If the robotic mower is activated,
the text "iMow is active" appears
on the status screen and the
Active symbol is displayed next to the
5.2)
129