Viking MI 632 M Gebrauchsanleitung Seite 113

Opening the panel:
Fold the panel (1) forwards. Hold the panel
in the opened position as the hinge springs
will close it automatically.
The connections for the perimeter wire (1)
and the power cable (2) are protected
against the weather when the panel is
closed.
0478 131 9937 B - EN
Closing the panel:
Fold the panel (1) rearwards – do not
pinch any cables.
Fitting the cover:
Fit the cover (1) onto the docking station
and allow it to engage – do not pinch any
cables.
9.5 Connecting the power cable to the
docking station
● Remove the docking station cover and
open the panel. ( 9.4)
Connect the connector of the power supply
unit (1) to the circuit board of the docking
station.
111