Completing Initial Installation - Viking MI 632 M Gebrauchsanleitung

The displayed mowing plan is
confirmed with OK and the final step
of the installation assistant is called
up.
During the active times, third
parties must keep out of the danger
area. The active times should be
adapted accordingly using the
iMow app.
Moreover, the applicable local
regulations on the use of robotic
mowers as well as the information
in the "For your safety" (
section must be observed and the
active times changed accordingly
using the iMow app as required,
either immediately or after
completion of initial installation.
In particular, you should check the
times of the day and night at which
it is permissible to use the machine
with the responsible authorities.
0478 131 9937 B - EN
Place all machines in the docking stations.
6.)
Lift each robotic mower slightly by the
carrying handle (1) to relieve the weight on
the drive wheels. Push the machines,
resting on their front wheels, into the
docking stations.
Then press the OK button on the
control panel.
Then press the OK button on the
control panel of each machine.
Check that the same cutting height is set
on all machines. Otherwise, set the same
cutting height on all machines. (

9.17 Completing initial installation

Remove all foreign bodies (e.g.
toys, tools) from the mowing area.
Complete initial installation by
pressing the OK button.
9.8)
125