Viking MI 632 M Gebrauchsanleitung Seite 117

docking station.
None of the other docking stations are
connected to the perimeter wire and these
do not generate a wire signal, so that their
only function is to charge the machines.
IMPORTANT:
If multiple machines and docking
stations are installed, the position of
the master docking station is
important in order to ensure that all
machine functions available while
working the mowing area.
If the machines are not correctly
positioned, the equipment may
malfunction during operation.
When selecting the position of the
master docking station, ensure that
there is sufficient space for all other
docking stations placed in
alignment and parallel to the master
docking station. Observe the
minimum distance between the
docking stations! ( 9.1)
Position of the master docking station
with an internal docking zone:
0478 131 9937 B - EN
The user is standing inside the mowing
area (D) to be installed (grey area).
Choose the position of the master docking
station (A) so that it is always at the last
position in the direction indicated by the
arrow (clockwise).
The minimum distance C from the
perimeter wire must be observed in the
corners.
Minimum distance C: 1 m
Make sure that all other docking
stations (B) are subsequently positioned
on the left side of the master docking
station (A) (anti-clockwise).
The distances for the installation variant
"internal docking zone" must be
considered. ( 9.1)
Position of the master docking station
with an external docking zone:
The user is standing inside the external
docking zone (D) to be installed (grey
area). Choose the position of the master
docking station (A) so that it is always at
the last position in the direction indicated
by the arrow (clockwise).
The minimum distance C from the
perimeter wire must be observed in the
corners.
Minimum distance C: 1 m
Make sure that all other docking
stations (B) are subsequently positioned
on the left side of the master docking
station (A) (anti-clockwise).
The distances for the installation variant
"external docking zone" must be
considered. ( 9.1)
Fastening the master docking station
and connecting it to the mains supply:
● Observe the docking zone installation
options. ( 9.1)
● Observe the requirement for the
docking zone location. (
● Connect the power cable to the master
docking station. ( 9.5)
● Route the power cable under the floor
plate when the master docking station
is installed at a wall. ( 9.2)
9.1)
115