Additonal Bios Features; Updating The Bios - DLoG IPC 7 Handbuch

Anhang F: BIOS

22.9. Additonal BIOS Features

The DLoG IPC 7/215 uses a AMIBIOS that is stored in an onboard Flash Rom chip and
can be updated using the CGUTL System Utility, which is available in a DOS based
command line, Win32 command line, and a Win32 GUI version.
The BIOS displays a message during POST and on the main setup screen identifying the
BIOS project name and a revision code. The initial production BIOS is identified as
I7IxxCyy, where I7 means IPC 7/215, xx meens the revision of the VGA BIOS and yy is
the version of the BIOS.

22.9.1. Updating the BIOS

The hardware of the IPC 7/215 lets you update the system BIOS without opening the
unit.
You should only update the BIOS if the BIOS in your DLoG IPC 7/215 is serverely
corrupted. During the update operation, the power supply to the unit must not be
interrupted. Should this happen, the unit needs to be sent in for repairs. Read also 22.10
BIOS Recovery .
198 Handbuch DLoG IPC 7/215