Hard Disk Security - DLoG IPC 7 Handbuch

Anhang F: BIOS

22.7.2. Hard Disk Security

This feature enables the users to set, reset or disable passwords for each hard drive in
Setup without rebooting. If the user enables password support, a power cycle must occur
for the hard drive to lock using the new password. Both user and master password can
be set independently however the drive will only lock if a user password is installed.
22.7.2.1. Hard Disk Security User Password
Feature
Primary/Master/
Slave HDD User
Password
196
Options
enter password
Handbuch
Description
Set or clear the user password for the
hard disk.
Note: This option will be shaded if the
hard drive does support the Security
Mode Feature set but user failed to
unlock the drive during BIOS POST.
DLoG IPC 7/215