User Programming Procedures - Unox BakerTop XBC series Bedienungsanweisung

User programming procedures

Operation using programs
The ChefTouch/BakerTouch electronic control panel allows the user to save up to 99 cooking
programs, each assigned with a name up to 25 letters long.
Access the programming menu by pressing the
Select the location in which you wish to save the program (from P01 to P99) using the
on display 5; press and use the
Press again and use the
Repeat this procedure for subsequent letters;
Finally, press the button to select the oven preheating temperature. The text "PRE" will appear;
Use the button to select either an absolute preheating temperature
between the preheating value and the value for the first cooking step of program;
-
-
+
Use to set the desired value, expressed in degrees;
Press the button to move to the next step and set the desired operating parameters (Duration, Core
Temperature, Cavity Temperature, Delta T, Climate) for the step;
Press the button and set the parameter governing airflow speed inside the oven cavity;
Press and hold the button for 5 seconds to store the program in the memory (after 5 seconds a confirmation
beep will sound).
Using saved programs:
Access the programming menu by pressing the
-
-
+
Press the buttons until the number correpsonding to the desired program appears on display 5;
Press the button to start the selected program;
Press the button again to stop the program.
N.B.
When a saved cooking program is started, the oven preheats automatically to the setted preheating temperature.
When a cooking program is started, the oven begins the set preheating step. During this step, all the LEDs
and displays remain off except the "START / STOP" LED, display 2 (which shows the text "PRE") and display 4
(which indicates the program being used). When the desired temperature has been reached and is maintained,
the oven beeps and the data corresponding to the first cooking step appears on the display. After the door has
been opened, the food placed inside and the door closed again, the cooking program begins automatically.
P
...
- +
button;
-
-
+
buttons to select the first letter of the name as desired;
-
-
buttons to select the second letter;
+
button;
21
ChefTop
™
-
-
or a temperature
BakerTop
+
buttons indicated
pp
difference
English
™