Setting The Parameters - Unox BakerTop XBC series Bedienungsanweisung

Setting the parameters

Setting the cooking duration
The time parameter is indicated via display 2, in hours.minutes, and can be set using the
If cooking step 1 is selected and the text "INF" (INFINITE) appears on display 2, the oven will operate
continuously until it is stopped manually by the user.
When the HOLD ("HLD") function is selected in subsequent cooking steps, the fans only operate when the
heating elements are on.
inF 0h 00' 9h 59'
Setting the core temperature
The core probe measures the increase in temperature inside the product during the entire cooking procedure,
and should be inserted into the thickest part of the food, with the very tip at the centre. You must make
sure that this probe is correctly positioned before beginning the cooking cycle: incorrect positioning may
compromise the end result.
The core temperature parameter is indicated via display 2, and can be set using the
When the set core temperature is reached, that cooking step is considered complete and the next step begins
(where applicable).
0°C 100°C
The XC249 external core probe kit can be used to connect an extra, smaller core probe which is suitable for
cooking vacuum-packed goods and products which come in smaller pieces.
English
12
buttons.
buttons.