Adjusting The Brake Force - Drum Brake; Angle Adjustment Of The Footplate - Otto Bock Motus Bedienungsanleitung

Accident risk. C@ RC@@G GJ>FN <M@ JIGT @AA@>ODQ@ RDOC NPAu>D@IO <DM KM@NNPM@ <I? KMJK@M
CAUTION
adjustment. The proper air pressure is indicated on the side wall of the tire. It should be at least
7 bar ’À½ F<“{ J @INPM@ NPAu>D@IO =M<FDIB @AA@>Ox PN@ JIGT JMDBDI<G M@<M RC@@GN RDOC <I <K-
KMJQ@? M<?D<G @S>PMNDJI JA H<SDH<GGT ± 1 mm.
<F@ NPM@ OJ uMHGT M@ODBCO@I <GG N>M@RN <I? IPON <AO@M H<FDIB <?EPNOH@ION{
INFORMATION
Tighten the wheel lock attachment with a torque of 10 Nm.
INFORMATION
6.6 Adjusting the Brake Force - Drum Brake (Fig. 43)
In order to achieve optimal braking effect, the brake force can be adjusted by means of the
<?EPNOH@IO N>M@R ’uB{ 43x DO@H ¾“{ C@ =M<F@ AJM>@ DN DI>M@<N@? =T OPMIDIB OC@ N>M@R >JPIO@M}
clockwise and decreased by turning the screw clockwise.
Turn the adjustment screw counter-clockwise until frictional noise occurs at the turning wheel. Then
tighten the adjustment screw until the frictional noise disappears. The wheel should run freely.
AO@M uIDNCDIB OC@ <?EPNOH@IOx A<NO@I OC@ <?EPNOH@IO N>M@R =T ODBCO@IDIB OC@ >JPIO@M IPO{
Ensure that the brake force of both rear wheels is adjusted equally.
INFORMATION
<F@ NPM@ OC<O OC@ ?MPH =M<F@ @IB<B@N RDOC NPAu>D@IO AJM>@ JIGT RC@I OC@ H<IP<G
INFORMATION
brake lever is set to the second ratchet position.
6.7 Angle Adjustment of the Footplate (Fig. 44)
MDJM OJ <?EPNODIB OC@ AJJOKG<O@ <IBG@x GJJN@I OC@ N>M@R >JII@>ODJIN <N DI?D><O@? DI OC@ uBPM@
’uB{ ÁÁ, item A). Subsequently tilt the footplate until the desired angle is achieved.
Make sure to re-tighten the loosened screw connections. The proper torque is 6 Nm.
INFORMATION
42
59