Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Safety
1.
System operation assumes knowledge of the operating instructions.
1.1
The following symbols are used in these operating instructions:
i
1.2
Connect the power supply and the display output device according to the safety regulations for electrical
operating equipment.
> Risk of injury
> Damage to the sensor
Avoid shocks and impacts to the light source and receiver.
> Damage to the sensor
The supply voltage must not exceed specified limits.
> Damage to the sensor
Protect cables from damage.
> Damage to the sensor
> Failure of the measurement device
optoCONTROL 1200/1201
Safety
Symbols Used
Indicates a hazardous situation which, if not avoided, may result in minor or moder-
ate injury.
Indicates a situation that may result in property damage if not avoided.
Indicates a user action.
Indicates a tip for users.
Warnings
Page 43
Werbung
Inhaltsverzeichnis
